| Name | Wire Twisting Forceps |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;010286;01-0286;PM914;PM-914;1440-15; |
| Specialty | Neuro, Ortho & Spine-Wire Twisters |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Shazira International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Wire Twisting Forceps
13.0 mm jaw length, 5-1/2″ (14.0 cm) Wire Twisting Forceps are specially designed forceps required to manipulate and twist off wire after it has been secured. Many procedures require the use of wire to stabilize a graft or to give the areas that was operated on additional support. This confers additionally stability thus reducing likelihood of trauma during the recovery period. Often the wire segments that are inserted must be secured by twisting. This instrument features jaws with serrations on them that allow for reduced slippage.
Description
Reviews (0)
Related products
Cable Cutter – Tungsten Carbide
SKU:
SI-01-1267
tungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm) Cable Cutter is an instrument ideally suited for use in orthopedic procedures. A number of surgical interventions require the placement of steel wires or cable to confer additionally stability to an area of bone. Specifically cable can be used in total hip arthroplasty to give more secure fixation and prevent trauma during the healing process. After inserting the cable it needs to be trimmed and manipulated to be the perfect length for that unique patients scenario. Additionally this instrument features tungsten carbide jaws and has a maximum capacity of 2.0 mm.
Hercules-Type Wire Cutter – 4.0 mm Wire Max
SKU:
SI-01-1287
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Boehler Wire & Pin Extractor
SKU:
SI-01-1266
Boehler Wire & Pin Extractor can be used in a variety of procedures to manipulate surgical pins and wire. Many orthopedic procedures such as repair of fractures or insertion of support after laminectomy procedures require the use of wire or pin. These added support confer additional stability to the bone and increase the speed of healing while reducing the damage done by trauma. This particular instrument can be used to insert, remove and reshape wires and pins as they are needed. This instrument is available in three different sizes to satisfy a variety of patient needs and surgeon preferences.
Diamond Pin Wire Cutter
SKU:
SI-01-1272
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm) Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Lineman Pliers
SKU:
SI-01-1290
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Delicate Wire Cutter – Tungsten Carbide
SKU:
SI-01-1270
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm) Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
End Cutter – Barrel Spring, Small, Tungsten Carbide
SKU:
SI-01-1274
tungsten carbide jaws, w/ coil spring, maximum capacity 1/16" (1.7mm), 6" (15.0 cm) End Cutter is a unique instrument designed for cutting of surgical pins or wire. Many orthopedic and neurosurgical spinal procedures require the use of such stabilization accessories to prevent trauma during recovery and confer additionally stability. This instrument is particularly well suited for end cutting which allows it to be made flush with the edge of bone or other tissue areas where it is being used. Additionally this end cutter features tungsten carbide jaws and has a maximum capacity of 1/16".
Corwin Wire Twister
SKU:
SI-01-1269
tungsten carbide, serrated jaws, long tips, 6-1/4" (15.9 cm) Corwin Wire Twister is a specialized instrument crafted to handle wire. Wires can e placed in a variety of surgical settings that require addition of and manipulation of wire. Producedures such as laminectomies require for the vertebrae to be stabilized so that it may heal correctly and reduce trauma to the spine. This twister features tungsten carbide inserts which confer stability as well as serrated jaws which gives them an additional stable grasp on the wire. Additionally this twister has long tips that allow it to fit into some tighter spaces.
Reviews
There are no reviews yet.