| Name | Wire Pulling Forceps |
| Lead Time | 0-3 days |
| Competitor | ;OS3085;275140;275-140;145636;14-5636;1456-36; |
| Specialty | Neuro, Ortho & Spine-Wire Twisters |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Shazira International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Wire Pulling Forceps
max capacity 1.0 mm, 6-1/2″ (16.5 cm) Wire Pulling Forceps are a specialized instrument ideally suited for using in manipulation of wire. Many neurosurgical and orthopedic procedures require placement of grafts or other things that necessitate some stabilization to prevent injury. Laminectomies and other spinal surgeries especially require the insertion of wire throughout to prevent incomplete healing or trauma and thus these forceps can be used to handle the wire and guide it through different areas. This instrument has a maximum capacity of 1.0 mm.
Description
Reviews (0)
Related products
Diamond Pin Wire Cutter
SKU:
SI-01-1272
cuts up to 5/64" (2.0 mm) diameter hard wire, 6-1/2" (16.5 cm) Diamond Pin Wire Cutter is a specially designed instrument crafted for use in cutting wire. Many different neurosurgical and orthopedic procedures require the insertion of wire to give the areas additional stability and this cutter can be used to clip these at the desired length. Not only can this instrument be used to trim wire but also surgical pins. Fracture repair and other bone repair surgeries has to be set with pins that also need to be trimmed using this instrument. This instrument is available in two designs: stainless steal or tungsten carbide both of which can cup up to a diameter of 2.0 mm.
Delicate Wire Cutter – Tungsten Carbide
SKU:
SI-01-1270
tungsten carbide jaws, cuts up to 1/36" (0.7 mm) diameter hard wire, 4-3/4" (12.1 cm) Delicate Wire Cutter is a versatile instrument crafted for use in trimming and cutting lengths of wire. Procedures such as laminectomies require addition of wire to confer some stability to the vertebrae to prevent trauma as healing occurs. This particular cutter is specifically designed for use with delicate wires. It features tungsten carbide jaws and are capable of cutting hard wire up to a diameter of 0.7 mm.
Lineman Pliers
SKU:
SI-01-1290
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Flat Nose Pliers – Slender Jaws
SKU:
SI-01-1279
slender jaws, 2.0 mm tip, 6" (15.2 cm) Flat Nose Pliers and Cutter is a multi-functional instrument that can be used as a pliers to manipulate the wire but also as a cutter to trim it to the appropriate length. This combination instrument also features a tapered jaw that allows it to access some areas that are more difficult to get to. Additionally, the flat nose prevents any trauma to surrounding tissue areas.
Hercules-Type Wire Cutter – 3.0 mm Wire Max
SKU:
SI-01-1286
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Cable Cutter – Tungsten Carbide
SKU:
SI-01-1267
tungsten carbide jaws, maximum capacity 2.0 mm, 7" (18.0 cm) Cable Cutter is an instrument ideally suited for use in orthopedic procedures. A number of surgical interventions require the placement of steel wires or cable to confer additionally stability to an area of bone. Specifically cable can be used in total hip arthroplasty to give more secure fixation and prevent trauma during the healing process. After inserting the cable it needs to be trimmed and manipulated to be the perfect length for that unique patients scenario. Additionally this instrument features tungsten carbide jaws and has a maximum capacity of 2.0 mm.
Kirschner Bow
SKU:
SI-01-1289
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Flat Nose Pliers & Cutter
SKU:
SI-01-1278
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Reviews
There are no reviews yet.