| Name | Leyla Brain Retractor – Two-Armed |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;FF262R;NL1277;575902;57-5902;5759-02; |
| Specialty | Neuro, Ortho & Spine-Retractors – Leyla Retractor System |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Shazira International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Leyla Brain Retractor – Two-Armed
two-armed, self-retaining, consisting of: 2 flexible tension arms (5759-10), 1 fixation base (5759-22), 2 spatula supports (5759-30) Leyla Brain Retractor is a highly specialized instrument for use in neurosurgical procedures of the brain. This retractor is self retaining and consists of two flexible tension arms as well as a fixation base and two spatula supports. The flexible two arm design makes this retractor ideal for assisting in intraventricular and subcortical procedures. Additionally this instrument is comprised of premium German operating-room grade stainless steel.
SKU:
SI-01-1064
Category: Hooks & Retractors
Description
Reviews (0)
Be the first to review “Leyla Brain Retractor – Two-Armed” Cancel reply
Related products
Adson Dura & Nerve Hook
SKU:
SI-01-999
3.0 mm tip, 8" (20.0 cm) Adson Dura & Nerve Hook is crafted for use in a wide variety or neurosurgical procedures. This hook is a multipurpose instrument that can be used to retract nerves but can also be used to retract the dural layer of the meninges during craniotomies and spinal surgeries. Additionally this instrument is available with either a sharp or blunt tip making it suited for retraction of very delicate tissue matter with the blunt tip or less sensitive tissue with the sharp tip.
Cervical Retractor Longitudinal Blade
SKU:
SI-01-1021
stainless steel, ball snap closure, blunt Cervical Retractor Longitudinal Blade is an added component to be used alongside the cervical retractor for longitudinal retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge to prevent trauma and tearing during retraction. They are available in variety of sizes and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Caspar-Type Titanium Spinal Spreading System
SKU:
SI-01-1015
suitable for dorsal access to the spinal column, interchangeable blades, curved blades allow larger operative area, reduced shadowing during x-ray, unilateral & bilateral access to lamina, lightweight, corrosion resistant titanium Casper Type Titanium Spinal Spreading System a set of instruments and components that is specifically designed for retraction and spreading in orthopedic neurosurgical procedures. This instrument is suitable for dorsal access to the spinal column. It features interchangeable blades which have a slight curvature that allows for a larger operative area and reduce shadowing during x-ray. It allows for unilateral and bilateral access to lamina and is formed from a lightweight, corrosion resistant titanium. It is available as the frame only, blade support with closure, blade supporting with adjustable screw or as a complete set.
Cervical Retractor – Hinged Frame Only
SKU:
SI-01-1018
hinged arms
Cervical Retractor can be used in a variety of neurosurgical procedures, specifically spinal surgeries. It features a ring handle for ease in manual operation as well as a hinged frame. This retractor can be used in laminectomies and other surgical maneuvers that require increased access to the spinal lamina or vertebral arch. This instrument is available with either rigid or hinged arms.
Adson Laminectomy Retractor
SKU:
SI-01-1000
hinged arms, 4x5 blunt prongs, 1-1/8" (2.80 cm), 12-1/8" (31.0 cm)Adson Laminectomy Retractor is ideally suited for use in retraction of muscle and soft tissue layers during laminectomy procedures. This procedure removes the lamina, a portion of the vertebrae, and it is necessary to have full access to the vertebrae in question. This retractor features ring handles for ease in handling as well as hinged arms and blunt prongs that provide a gentle but secure hold on the tissue.
Adson Cerebellar Retractor
SKU:
SI-01-998
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Beckmann-Eaton Laminectomy Retractor
SKU:
SI-01-1004
hinged arms, 7x7 prongs, 12-1/2" (32.0 cm) Beckmann-Eaton Laminectomy Retractor is designed for use in neurosurgical laminectomy procedures. In order to perform this procedure the soft tissue and muscle layer directly atop of the spinal need to be incised through and retracted. This instrument features hinged arms and 7x7 prongs that allow gentle but effective retraction that gives direct access to the surgical field. This retractor is available either with either sharp or blunt prongs making it a versatile instrument to satisfy any patient need or surgeon preference.
Capsule Retractor
SKU:
SI-3991
3 sharp prongs, 22.0 mm blade, 10" (25.0 cm) Capsule Retractor is a uniquely designed instrument for use in some orthopedic interventions such as Bankart surgeries . Specifically three sharp pronged design can be placed on the medial aspect of the neck of the scapula. Retraction of the labrium as well as the anterior capsule is accomplished with this retractor.

Reviews
There are no reviews yet.