| Name | Rubio Needle Holder & Wire Twister |
| Lead Time | 0-3 days |
| Competitor | ;MB550R;CH2535;121250;121-250;PM2122;PM-2122;MDS2412535;32302;32-302;362023;36-2023;3230-20;32205;32-205;3220-50;3230-20_3220-50; |
| Specialty | Neuro, Ortho & Spine-Wire Twisters |
| Material Finish | Stainless Steel/Tungsten Carbide |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Shazira International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Rubio Needle Holder & Wire Twister
tungsten carbide, serrated jaws, snub nose Rubio Needle Holder & Wire Twister is a multi purpose instrument designed for use in a variety of surgical procedures. Specifically the jaws of this tool are crafted to effectively grip and manipulate fine metallic forms such as needles or wires. This instrument can be used to grasp and manipulate needles in procedures that require suturing and creating needles holes. Additionally it can be used to handle wire such as when it is placed and twisted to do things such as stabilize the vertebrae after laminectomies of the spine. This instrument features tungsten carbide, serrated jaws and is available in two lengths 5″ and 7 5/8″.
Description
Reviews (0)
Related products
Hercules-Type Wire Cutter – 2.2 mm Wire Max
SKU:
SI-01-1285
for drill-wires of max 2.2 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 7" (18.0 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 2.2 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Lineman Pliers
SKU:
SI-01-1290
side-cutting, maximum capacity 1.6 mm, 8-1/2" (21.6 cm) Lineman Pliers are a multi-purpose instrument designed for use in surgical procedures to manipulate wire. Many orthopedic surgeries such as fracture repair depend on the use of wire to approximate the fragments and accelerate the healing process. Wires must be manipulated and wrapped to fit the particular scenario where they are needed and these pliers are built for that. They features tungsten carbide jaws and are side cutting with a maximum capacity of 1.6 mm.
Demel Wire Guide
SKU:
SI-01-1271
Demel Wire Guide is a specialized instrument crafted for use in surgical procedures that require the addition of wire. This instrument features a smooth handle from which extends a slim neck and a hook shaped head. Many orthopedic procedures require the use of wire for stability such as to wrap around a bone to approximate a fracture and this instrument can be used to comfortably manipulate wire. This instrument is available in three sizes 30.0 mm, 47.0 mm and 57.0 mm diameters.
K-Wire Side Cutter – Tungsten Carbide
SKU:
SI-01-1288
tungsten carbide jaws, cuts up to 0.047" (1.1 mm) diameter hard wire, 6" (15.2 cm) K-Wire Side Cutter is a versatile instrument that can be used in a variety of surgical procedures. It is specifically designed for use in cutting wire in a particular perpendicular orientation. The unique design of this instrument allows it to comfortably be set flush against the areas where the wire has been inserted and clip it at a length that makes it the best fit. A variety of spinal procedures require for the placement of wire through the newly grafted area to give additional support throughout recovery and this instrument can be used in manipulation and cutting of these wires. Additionally this instrument features tungsten carbide jaws and can cut wires up to a diameter of 1.1 mm.
Corwin Wire Twister
SKU:
SI-01-1269
tungsten carbide, serrated jaws, long tips, 6-1/4" (15.9 cm) Corwin Wire Twister is a specialized instrument crafted to handle wire. Wires can e placed in a variety of surgical settings that require addition of and manipulation of wire. Producedures such as laminectomies require for the vertebrae to be stabilized so that it may heal correctly and reduce trauma to the spine. This twister features tungsten carbide inserts which confer stability as well as serrated jaws which gives them an additional stable grasp on the wire. Additionally this twister has long tips that allow it to fit into some tighter spaces.
Hercules-Type Front & Side Cutter
SKU:
SI-01-1284
replaceable tungsten carbide blades w/ integrated rubber jaws, for max 1.6 mm drill wire, 7" (17.8 cm)Hercules-Type Front & Side Cutter is a multi-purpose instrument suitable for a variety of orthopedic procedures in which wire or pins are used. Fracture repair procedures can utilize pins to set the bone fragments or can be approximated by wrapping wire around. This instrument is ideally suited for manipulation of wire and pins as well as cutting them either from a front or a side approach. This instrument features replaceable tungsten carbide jaws with integrated rubber jaws for a maximum 1.6 mm drill wire.
Cannulated Pin Cutter
SKU:
SI-01-1268
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm) Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Hercules-Type Cable Cutter
SKU:
SI-01-1282
replaceable tungsten carbide blades, for 1.0 mm to 2.0 mm cables, 7" (18.0 cm) Hercules-Type Cable Cutter can be used to trim and adjust the length of cables. This instrument features replaceable tungsten carbide blades that can be used on for cables from 1.0 mm to 2.0 mm. Tungsten carbide jaws gives this instrument added strength as it is the hardest metal made for surgical instruments and results in a supremely durable jaw that can be used for sustained cutting. Additionally this instrument is 7" long and has gold tipped handles.
Reviews
There are no reviews yet.