| Name | Needle Nose Pliers – Delicate Jaws W/ Groove |
| Lead Time | 0-3 days |
| Competitor | ;OS3071;OS3072;275565;275-565;KI48242;KI-48-242;145040;14-5040;323339;32-3339;374100;0-48245;71170063;048245;1450-40; |
| Specialty | Neuro, Ortho & Spine-Wire/Pin Cutters & Pliers |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Shazira International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Needle Nose Pliers – Delicate Jaws W/ Groove
delicate, jaws w/ notch, 2.0 mm tapers to 1.0 mm at tip, 5-1/2″ (14.0 cm) Needle Nose Pliers can be used in a variety of ways to manipulate wire. These pliers are of a delicate design and features jaws with a groove that allows for ease in grasping wire. This instrument is specially-designed for use with cerclage wire which is used in fracture repair to approximate the bony fragments that have been repaired. In this way this wire confers added stability and accelerates the healing process.
Description
Reviews (0)
Related products
Flat Nose Pliers & Cutter
SKU:
SI-01-1278
3.5mm tip, cuts 0.2 mm to 1.5 mm wire, 6-1/2" (16.5 cm) Flat Nose Pliers are ideally suited for use in manipulation of wire. Particularly these pliers can be used in situations where it is required to make very sharp, angled bends in the wire. The delicate jaw of this instrument tapers to 2 mm which allows it to be used in manipulating cerclage wire. Additionally this instrument measure 6" long and is forged from premium German grade steel making it a finely crafted and reliable instrument.
Hercules-Type Wire Cutter – 2.2 mm Wire Max
SKU:
SI-01-1285
for drill-wires of max 2.2 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 7" (18.0 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 2.2 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Cannulated Pin Cutter
SKU:
SI-01-1268
end cutting, max cutting capacity 1/16" (1.7 mm), 7-1/2" (19.0 cm) Cannulated Pin Cutter is a specialized instrument ideally suited or use in procedures of fracture repair or other procedures where a graft is set with a pin. The unique design of this cutter allows for effective end cutting. The entire head portion of the pin can be inserted into the cutter and clipped flush and the remaining clipped portion remains held in the cutter to be removed. The maximum cutting capacity of this pin cutter is 1.7 mm.
Demel Wire Guide
SKU:
SI-01-1271
Demel Wire Guide is a specialized instrument crafted for use in surgical procedures that require the addition of wire. This instrument features a smooth handle from which extends a slim neck and a hook shaped head. Many orthopedic procedures require the use of wire for stability such as to wrap around a bone to approximate a fracture and this instrument can be used to comfortably manipulate wire. This instrument is available in three sizes 30.0 mm, 47.0 mm and 57.0 mm diameters.
Kirschner Bow
SKU:
SI-01-1289
Kirschner Bow is an instrument that can be used in a variety of orthopedic surgical procedures. A kirschner wire can be used to stabilize and approximate fractures after surgical repair. These wires can be quite easy to insert but must be manipulated with the proper instrumentation such as this bow. This bow applies a longitudinal force of tension that prevents rotation of the wire within the apparatus. This instrument is available in three sizes: medium, large and extra large as well as a set of 3 extra hooks for the krischner bow.
Hercules-Type Wire Cutter – 4.0 mm Wire Max
SKU:
SI-01-1287
for drill-wires of 2.5 - 4.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 11" (27.9 cm) Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum ranging from 2.5 – 4.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Hercules-Type Wire Cutter – 3.0 mm Wire Max
SKU:
SI-01-1286
for drill-wires of max 3.0 mm, replaceable tungsten carbide blades & replaceable rubber jaws, 9" (23.0 cm)Hercules-Type Wire Cutter is a highly reliable instrument made for use in a variety of surgical procedures that require wire and thus cutting of wire. This wire cutter is specifically designed for use with drill-wires at a maximum 3.0 mm. This instrument features replaceable tungsten carbide blades which are inherently more durable than stainless steel and have an extended service-life. It also features replaceable rubber jaws making it highly versatile and customizable to accommodate a vast array of surgical scenarios. This instrument is available in either a standard design or left-handed.
Locking Pliers
SKU:
SI-01-1291
reinforced jaw hinge, self-locking lever w/ adjustment screw & one-handed quick release Locking Pliers can be used to shape and use wire in many different surgical procedures. A unique feature of this instrument is a reinforced jaw hinge as well as a self-locking lever with adjustment. This makes this instrument highly versatile and able to adapt to a variety of surgical scenarios. Additionally this instrument has a one-handed quick release and is available in three different lengths 7", 8" and 10".
Reviews
There are no reviews yet.