| Name | McCulloch Multi-Hooked Blade – Titanium |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;5757-44T;MF387T;575745T;57-5745T;5757-45T;MF388T;575746T;57-5746T;5757-46T;MF389T;575747T;57-5747T;5757-47T;MF390T;575748T;57-5748T;5757-48T;MF391T;575749T;57-5749T;5757-49T;5757-44T_5757-49T; |
| Specialty | Neuro, Ortho & Spine-Retractors – Mcculloch Retractor System |
| Material Finish | Titanium |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Shazira International |
| Sterility | Non-Sterile |
| Usage | Reusable |
McCulloch Multi-Hooked Blade – Titanium
titanium McCulloch Multi-Hooke Blade is an accessory component that can be used along with the McCulloch retractor frame. The multi-hooked design gives multiple lengths at which small spokes project from the main blade giving retraction ability throughout the length of the blade. This type of instrument is particularly well suited for use in orthopedic spinal procedures that require increased visualization and access to particular segments of the spine . Additionally it is made from titanium which makes it stronger and more durable than stainless steel as well as lightweight and resistance to corrosion, staining and pitting. and is available in six blade lengths ranging from 2.0 to 7.0 and is sold in eaches.
Description
Reviews (0)
Related products
Blade Ejector Forceps
SKU:
SI-01-1006
for changing blades w/ ball snap system, 4-1/2" (11.5 cm) Blade Ejector Forceps are crafted for use along side a variety of different blades. It is ideally suited for changing blades with a ball snap system, all of which are also available by Surgical. These forceps are hand-crafted by certified instrument makers to conform to the highest standards in instrumentation. This instrument is a valuable addition to any surgical repertoire specifically in quickly and effectively changing blades.
Cervical Retractor Medial Blade
SKU:
SI-01-1022
stainless steel, ball snap closure, w/ teeth Cervical Retractor Medial Blade is an added component to be used alongside the cervical retractor for medial retraction. All five blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth that are variety in their size and curvature making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord.
Charnley Initial Incision Retractor
SKU:
SI-01-1025
standard pattern Charnley Initial Incision Retractor is a unique instrument specifically designed for use in retraction at the beginning of surgical intervention when the first incision is made. An ideal tool for a vase array of neurosurgical procedures because it securely open up the surgical field to give unobstructed access. This retractor set includes a frame, a long blade, short blade as well as a weight on a chain.
Cervical Retractor – Hinged Frame Only
SKU:
SI-01-1018
hinged arms
Cervical Retractor can be used in a variety of neurosurgical procedures, specifically spinal surgeries. It features a ring handle for ease in manual operation as well as a hinged frame. This retractor can be used in laminectomies and other surgical maneuvers that require increased access to the spinal lamina or vertebral arch. This instrument is available with either rigid or hinged arms.
Beckmann-Adson Laminectomy Retractor
SKU:
SI-01-1003
hinged arms, 4x4 prongs, 12-1/8" (31.0 cm)Beckmann-Adson Laminectomy Retractor is a specialized instrument made for use in neurosurgical procedures, specifically those pertaining to the spine. This retractor has a long and slim design and features hinged arms from which 4x4 prongs extend. During laminectomy these prongs can be used to retract soft tissue and muscle layers form directly above the vertebral lamina and the ratcheting mechanism can hold the soft tissue out of way. Additionally this instrument is available in two widths 25.0 mm and 44.0 mm as well as in either sharp or blunt to accommodate a variety of surgical approaches.
Adson Cerebellar Retractor
SKU:
SI-01-998
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Cloward Style Blade Retractor
SKU:
SI-01-1026
7-1/2" (19.0 cm)Cloward Style Blade Retractor is a highly versatile instrument crafted for use in a variety of neurosurgical procedures. It is best suited for use in retraction such as that which is necessary in spinal surgery. The ribbed handle giving additional gripping ability and the angled blade design makes it easy to manipulate in the surgical field while keeping the handle out of the plane of surgery. Additionally this retractor is available in four different sizes 13.0 mm (no lip), 18.0 mm, 20.0 mm and 25.0 mm.
Beckmann Laminectomy Retractor
SKU:
SI-01-1002
hinged arms, 4x4 sharp prongs, 17.0 mm deep, 12-1/8" (31.0 cm)Beckman Laminectomy Retractor is made for use in neurosurgical procedures of the spinal cord. Specifically this retractor can be used in laminectomy procedures in which the lamina of the vertebrate is removed. This retractor can be used to push aside the muscle and soft tissue layers that lie directly above the spinal cord. The ring handles and ratcheting mechanism make it easy to operate manually and to lock into the appropriate width. Additionally this retractor has sharp prongs and hinged arms to keep a firm grip on the tissue it is retracting.
Reviews
There are no reviews yet.