| Name | Twist Drill |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;FF908R;S0107;S-0107;74310030;743-1003-0;575111;57-5111;732596;73-2596;FF908;R9395;R-9395;VM84-3607;VM843607;5751-11; |
| Specialty | Neuro, Ortho & Spine-Anterior Cervical Fusion Instruments |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Shazira International |
| Sterility | Non-Sterile |
| Usage | Reusable |
Twist Drill
Twist Drill
drilling depth 8.0 mm, length 5-3/4″ (14.6 cm)
Twist Drill is a unique drilling instrument designed to create new holes to increase access to certain areas such as through the skull to the brain tissue. This instrument is crafted to distribute the force from the center of the drill point out and thus is ideal in creating new holes without the use of pilot holes. A variety of surgeries including craniotomies can benefit from a specialized drill such as this one. Additionally this instrument has a drilling depth of 8.0 mm and a length of 14.6 cm.
Description
Reviews (0)
Related products
Depth Gauge
SKU:
SI-01-893
Depth Gauge Depth Gauge is designed for use in a variety of situations, specifically those in which holes are drilled into bone. This gauge can be used to measure the depth of holes that have been drilled such a initial pilot holes or burr holes in surgeries such as craniotomies. This instrument can be used to precisely make holes that are the specific depth that is needed to expose the surgical field without causing undue damage to the surrounding area. This gauge is available in two sizes: small at 13.0 cm and large at 21.3 cm making it suitable for a variety of different surgical scenarios.
Bone Clamp (Reposition Forceps)
SKU:
SI-01-899
Bone Clamp (Reposition Forceps)
extra long ratchet, curved, 5-1/8" (13.0 cm)
Bone Clamp is a general purpose clamp also referred to a reposition forceps for use in variety of procedures that require clamping and handling of bone. This instrument can be used when there has been a fracture to a bone and there are fragments that need to be removed but also in procedures that require alignment of bone segments and resetting. A unique feature of this clamp is the extra long ratchet that gives it an increased spectrum of widths as well as a slight curvature which allows it to be contoured to the bone shafts.
Vertebral Body Dissector (Caspar Type)
SKU:
SI-01-896
Vertebral Body Dissector (Caspar Type)Caspar Type Vertebral Body Dissector is ideally suited for use in neurosurgical procedures of the spine. A dissector is designed to be inserted between the vertebral bodies to increase the space between two adjacent vertebrae. This increase in space allows for the surgeon to see the surgical field more clearly and also gives adequate space for the procedure to be performed. This dissector is available in small or large making it an adequate fit for a variety of patient needs and surgeon preferences.
Bishop Bone Holding Forceps
SKU:
SI-01-897
Bishop Bone Holding Forceps
adjustable jaw
Bishop Bone Holding Forceps are ideally suited for use in orthopedic surgical procedures. This instrument is uniquely designed for procedures such as fracture repair or bone reduction that require a firm grasps on a bone in a particular orientation. It aids in alignment of bone segments through a procedures without slipping or movement to ensure accuracy. Additionally these forceps feature and adjustable jaw that gives it increased versatility making it suitable to almost any surgical scenario.
Bone Reduction Forceps
SKU:
SI-01-903
Bone Reduction Forceps - Curved Jaws, Speed Lock
curved jaws, speed lock
Bone Reduction Forceps are specially designed for use in surgeries that require manipulation of bone. Specifically these forceps features a curved jaw with some serrations that make it well suited for use in gripping bone. They can aid in approximation of bones in setting and alignment of fractures as well as any other manipulation of bone that require a firm grasp and hold. Additionally these forceps have a speed lock and is available in either 7" or 9" to satisfy any particular patient need or surgeon preference.
Bone Graft Holder (Caspar Type)
SKU:
SI-01-889
8.0 mm x 15.0 mm tip, 21.0 cm
Capsar Type Bone Graft Holder is ideally suited for use in orthopedic type procedures that require the use of a bone graft. This instrument is made to hold and handle the bone graft until it is inserted into the area where it is necessary and secured into place. This holder features a large rounded handle from which extends a body that ends in a mechanism for grasping the bone graft. This instrument features a 8.0 mm x 15.0 mm tip
Bone Reduction Forceps
SKU:
SI-01-904
Bone Reduction Forceps - Jaws Slightly Curved
jaws slightly curved, 5-1/2" (14.0 cm)
Bone Reduction Forceps is a highly versatile instrument made for use in orthopedic surgeries that require alignment and manipulation of bone. This forceps comes equipped with ring handles for ease in manual operation as well as a ratcheting mechanism that allows the surgeon to set it at any particular width. Additionally there is a slight curvature to the jaws and measuring at 5.5" long this instrument can easily fit into small spaces and smaller sized bones.
Reiner Rongeur
SKU:
SI-2612
Reiner Rongeur
7" (17.8 cm)
Reiner Rongeur can be used in many different surgical interventions that require cutting or clipping of bone. Although it is designed for use in orthopedic procedures to repair injuries to bone and cartilage it has wider applications in any surgery that require increased access through bone or manipulation of bone for smooth closure. A unique aspect of this instrument is that the jaws can be interchanged among three different sizes: 3.0 mm, 4.0 mm and 6.0 mm bite making it well suited for a variety of surgeon preferences and patient needs.
Reviews
There are no reviews yet.